Set Part Info

Sets each part’s Module, Sub-module, name, Grain Direction and Face Side for Prepare Parts. An empty Grain Direction follows the part’s placement in the product: vertical parts get vertical grain, horizontal parts get grain along the product’s width.

geometries

module

Optional Sub-module, one level inside the Module

subModule

name

Grain along the part’s length or width. Empty follows the part’s placement in the product.

grainDirection

Optional decorative side override, for fronts and visible panels

faceSide

<p><strong>Furniture Production manipulation for the BeeGraphy Editor.</strong></p>

Furniture Production

Screenshot 2026-10-01 at 11.32.47.png

Screenshot 2026-10-01 at 11.32.29.png

front

back

left

right

bottom

Bands the sides of a part facing the chosen directions (Front −Y, Back +Y, Left −X, Right +X, Top +Z, Bottom −Z, as in the viewer) with a linear-flat banding material; a direction along the part’s thickness is skipped. Edges, if given, band the sides they lie on as well. Prepare Parts derives the Cut Size: Finished Size minus the banding, plus the edgebander’s Trim Allowance from its Machine Profile.

geometry

Optional: edges of the part to band, each lying on one of its sides

edges

banding

Edge Banding

Production Line id or name. Empty uses the organization’s first line.

productionLine

Reads each part’s outline (Finished Size), thickness and sheet material off its solid, lays it flat, turns grained parts so their grain runs along the sheet’s grain and locks their rotation, validates it against the Production Line’s router, and groups it into one branch per sheet material so a nesting node run once per material. Banded parts are output as Cut Size blocks, and parts narrower than the edgebander takes as Narrow Blanks.

Prepare Parts

Cut Size outlines, one data-tree branch per sheet material

The material’s sheet width, one per branch

sheetWidth

The material’s sheet height, one per branch

sheetHeight

The router’s part spacing for this material, one per branch

spacing

The router’s sheet-edge margin for this material, one per branch

sheetEdgeMargin

Parts smaller than the router’s minimum part size, kept out of nesting. Wire them straight into Production Package, which lists them on the format-saw page.

formatSawParts

One message per part that could not be prepared

problems

The part descriptions as JSON, to reproduce issues without the model

partDescriptionsJson

Latin letters and digits only. Prefixes every file name, e.g. PAS115_Karta-1.CNC.

modelCode

orderNumber

Resolution of the label BMPs, to match the thermal printer

labelDpi

Needed for KDT Part Program export paths (KD610/<Model Code>/<Model Code>_<Product>/…). Leave empty if the line has no drilling machine.

product

Builds one Sheet Program per Cutting Map through beegraphy-cam’s headless milling path and packs them into a ZIP, one folder per router and a subfolder per sheet material, numbered within the material. Any problem blocks the whole package. The designer never opens the CAM panel.

Nested Cut Size geometries, from Prepare Parts through a nesting node

Prepare Parts’ Format Saw Parts, wired directly (not nested). Listed on the format-saw page.

Production Package

One message per part that blocked the package. Empty means the ZIP was built.

Set Part Info

Ports

Inputs

Outputs

History