Represents a C-shaped beam with configurable material, dimensions, texture, price, and weight.

C-Beam

material

Texture

Linear

Deconstruct Material

Sheet

Factory

Count

Volumetric

Weight

Profile

ddddd

Represents a linear round material with configurable kind, diameter/thickness, texture, price, and weight.

Linear Round

Returns geometry with configured material

geometry

color

The name of the texture available in the BGPM texture library

texture

metalness

roughness

opacity

Apply Material

resultGeometry

Represents a material that is priced and sold based on weight.

Breaks down a linear flat material (e.g., tape, strip) into its fundamental attributes for detailed access and usage.

Deconstruct Linear Flat

The total length of the linear flat, typically measured in millimeters or inches.

length

The width of the linear flat material, typically in millimeters or inches.

width

The thickness of the linear flat material, indicating how thin or thick it is.

thickness

The overall mass of the linear flat material, typically expressed in kilograms or pounds, indicating how heavy it is.

weight

The monetary cost associated with the linear flat material, given in the relevant currency.

price

Represents a solid rectangle bar profile with configurable material, dimensions, texture, price, and weight.

Rectangle Bar

An optional value to offset the geometry for precision manufacturing, accounting for material lost during cutting

kerf

Generates a hollow rectangular tube (box-shaped) by lofting between inner and outer rectangular profiles and extruding along a specified length.

Material used to form the rectangular tube. Must define outer width, height, and wall thickness.

Total extrusion length of the tube along the Y-axis.

3D origin point where the tube starts (in world coordinates).

origin

Rectangle Tube Factory

Final hollow rectangular tube represented as a 3D solid, built using material dimensions.

profile

Width of material removed during cutting; may affect real-world manufacturing precision

Generates a 3D solid T-beam profile based on structural parameters such as flange width, depth, and web thickness

Total length of the beam extrusion along the X-axis

3D origin point where the beam starts; sets the base position of the T-beam

T-Beam Factory

The resulting 3D solid geometry of the extruded T-beam

Represents an L-beam (corner profile, angle profile) with different side lengths, configurable material, dimensions, texture, price, and weight.

L-Beam Different

Represents a solid, square-profile pipe with configurable material, dimensions, texture, price, and weight.

Square Bar

The Deconstruct C-Beam node extracts the structural and material properties of a C-beam profile, allowing for precise analysis and manipulation.

Deconstruct C-Beam

The full length of the C-beam, typically in millimeters or inches.

The total height of the C-beam cross-section.

depth

The width of the flange portion of the C-beam profile.

flangeWidth

flangeThickness

The thickness of the vertical web between the flanges.

webThickness

The mass of the C-beam, typically in kilograms or pounds.

The monetary cost associated with the C-beam material, given in the relevant currency.

The Deconstruct I-Beam node extracts essential structural and material attributes from an I-beam profile, enabling precise modeling, simulation, and cost analysis.

Deconstruct I-Beam

The overall length of the I-beam, typically measured in millimeters or inches.

The vertical height of the I-beam cross-section from flange to flange.

The width of each flange (horizontal part) of the I-beam profile.

The thickness of the top and bottom flanges of the I-beam.

The thickness of the vertical central section (web) connecting the flanges.

The overall mass of the I-beam material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the I-beam material, given in the relevant currency.

Represents a linear tape with configurable material, width, thickness, face and edge textures, price, and weight.

Linear Flat

side

Material Assign

Represents a volumetric material with type, density, and price per unit of volume.

Kerf is the width of material removed by a cutting tool, such as a saw blade, during a cut.

Generates a flat solid sheet from material and size parameters.

Material defining the thickness and other sheet parameters.

Width of the sheet along the X-axis, in millimeters.

Length of the sheet along the Y-axis, in millimeters.

Sheet Factory

Generated 3D solid of the sheet geometry.

sheet

Width of the material removed by the cutting tool during processing (e.g., laser, saw).

Generates a solid cylindrical bar (round bar) from the specified material, with configurable diameter, length, and origin point

Length of the round bar. Must be a positive number.

3D origin point where the round bar will be generated.

Round Bar Factory

Solid cylindrical geometry representing the generated round bar.

Generates an L-beam solid with unequal legs based on the selected material.

Material must include the "l-beam-unequal" class with dimensions for both legs and thickness.

Extrusion length of the L-beam along the Y-axis.

Starting point of the L-beam in 3D space.

L-Beam Different Factory

Resulting 3D solid of the unequal-leg L-beam.

Represents materials sold individually or in kits, such as components, assemblies, and products.

Generates a 3D C-beam (channel beam) using material dimensions and extrudes it along the Y-axis.

Material with class "c-beam" that defines the geometry parameters of the profile.

Extrusion length of the C-beam along the Y-axis.

Starting 3D point from which the beam is generated.

C-Beam Factory

Resulting 3D solid geometry of the C-beam.

The width of material lost due to cutting during fabrication (default is 3mm).

Creates a hollow cylindrical solid (round tube) using the given material, diameter, wall thickness, and length

Extrusion length of the tube along its axis. Must be a positive number

3D starting point for the tube base center

Round Tube Factory

The resulting hollow cylindrical geometry as a 3D solid

Represents an L-beam (corner profile, angle profile) with equal sides, configurable material, dimensions, texture, price, and weight.

L-Beam Equal

Represents a solid, round-profile bar with configurable material, dimensions, texture, price, and weight.

Round Bar

Breaks down a volumetric material into its fundamental attributes for detailed access and usage.

Deconstruct Volumetric

The overall density of the volumetric material, typically expressed in kilograms or pounds, indicating how heavy it is.

density

The monetary cost associated with the volumetric material, given in the relevant currency.

Breaks down a material to extract its weight and other fundamental attributes for detailed access and usage.

Deconstruct Weight

The overall density of the weight material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the weight material, given in the relevant currency.

Represents a hollow rectangular-profile tube with configurable material, dimensions, texture, price, and weight.

Rectangle Tube

Represents a hollow round pipe profile with configurable material, dimensions, texture, price, and weight.

Round Tube

The Deconstruct Hex Bar node extracts key attributes from a hexagonal bar profile, enabling precise analysis and downstream use in design or manufacturing.

Deconstruct Hex Bar

The full length of the hexagonal bar, usually in millimeters or inches.

The distance measured across the flat sides of the hexagonal bar profile.

acrossFlats

The overall mass of the hexagonal bar material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the hexagonal bar material, given in the relevant currency.

The Deconstruct Hex Tube node extracts key geometric and material attributes from a hollow hexagonal tube, supporting engineering analysis and modeling workflows.

Deconstruct Hex Tube

The total length of the hexagonal tube, typically in millimeters or inches.

The measurement across the flat sides of the external hexagonal profile.

The thickness of the tube wall, indicating how thick the material is around the hollow section.

The overall mass of the hexagonal tube material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the hexagonal tube material, given in the relevant currency.

Represents a solid, hexagonal-profile bar with configurable material, dimensions, texture, price, and weight.

Hex Bar

Width of material removed by tool. Used for process registration and downstream manufacturing steps.

Applies a volumetric material to an input solid and registers processing options (volume, kerf).

Volumetric material (materialClass: "volumetric").

Base 3D solid to which the volumetric material will be applied.

solid

Volumetric Factory

Resulting 3D solid with the volumetric material applied.

volumetric

Generates an L-profile (equal-leg angle) solid from material parameters.

Material must include the "l-beam-equal" class with leg length and thickness properties.

Starting 3D point for the L-beam geometry.

L-Beam Equal Factory

Resulting 3D solid geometry of the equal-leg L-beam.

The Deconstruct Rectangle Bar node extracts the essential geometric and material attributes from a rectangular bar profile, enabling detailed inspection and manipulation.

Deconstruct Rectangle Bar

The full length of the rectangular bar, typically measured in millimeters or inches.

The width of the rectangular bar’s cross-section.

The height or thickness of the rectangular bar’s cross-section.

height

The overall mass of the rectangular bar material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the rectangular bar material, given in the relevant currency.

Accepts a weight-class material and an input geometry.

Material with materialClass: 'weight' (e.g., materials whose processing/metrics are tracked for weight calculations).

 Input 3D geometry from which the volume will be computed.

Weight Factory

Pass through of the input material. The computed volume is registered in the processing registry during exec.

Represents a T-beam profile with configurable material, dimensions, texture, price, and weight.

T-Beam

Represents a hollow, square-profile pipe with configurable material, dimensions, texture, price, and weight.

Square Tube

Generates a 3D solid of linear flat material (such as a strip or tape).

Material defining the width, thickness, and other physical properties of the strip.

Extrusion length of the linear flat along the Y-axis, in millimeters.

Starting 3D point of the linear flat in space.

Linear Flat Factory

Generated 3D solid geometry of the linear flat material.

linearFlat

Generates a 3D solid of linear round material (such as a strip or tape).

Linear Round Factory

linearRound

Width of material removed during cutting (e.g., laser or saw). Affects processing precision

Creates a hollow rectangular tube (square in cross-section) by extruding a profile from the given origin point

The material to assign to the resulting tube

Length of the tube extrusion. Must be a positive number and within material limits.

The 3D starting point for the extrusion. If a plane is attached to this point, the extrusion aligns with that orientation.

Square Tube Factory

The final solid geometry of the square tube after extrusion and material application

Generates a solid hexagonal bar using material dimensions and extrudes it along the Y-axis.