Tool
Check whether two solids overlap and report the interference volume
Docs for v4.0.3, the latest version.
ID
tool-analysis-interference-checkGroup
Analysis
Plugin
ToolKeywords
2
What the node takes in, from wires or typed values.
Solid A
First solid
Solid B
Second solid
3
What the node gives out, to wire into other nodes.
Interferes
True when the solids overlap by more than the tolerance
Volume
Total volume of the overlapping region
Bodies
Solid bodies formed by the overlap
1
Settings on the node itself, changed in its panel.
Tolerance
Default 0.000001
Minimum interference volume that counts as an overlap
Interference Check or its keywords.
| Port | Type | Description | | -------------------- | ------- | -------------------------------------------------------- | | Solid A | Solid | First solid. | | Solid B | Solid | Second solid. | | Interferes (out) | Boolean | True when the solids overlap by more than the tolerance. | | Volume (out) | Number | Total volume of the overlapping region. | | Bodies (out) | Solid | Solid bodies formed by the overlap. |
| Config | Type | Description | | ------------- | ------ | ------------------------------------------------------ | | Tolerance | Number | Minimum interference volume that counts as an overlap. |
1e-6 for a strict check, or raise it to ignore insignificant contact.Solid Intersection
Solid Difference
Bounding Box